| |
| Two
Liquid Meter/Mix/Dispense System |
|
| Control
Panel Part |
|
| Gear
Pump Part |
|
| Static
Mixer Part |
|
| Dspensing
Valve |
|
| |
| Two Liquid Meter/Mix/Dispense System |
|
| PR-2D is the unique accurate Meter/Mix/Dispense
System with Gear Pump to meet various shot.
This is a unique accurate Meter/Mix/Dispense
System with Two Liquid material made by our
independent technology based on an abundant
experience and high achievements.
It can't only optimize the any conditions of
lipuids to allow for a variety of liquids such
as Epoxy,
Silicone,Urethane but maximize efficiency of
work.
As a custom-made production system which satisfies
any customers, you can result the best production
efficiency in an automatic production line.
|
| |
 |
 |
Standard Two Liquid Meter /Mix/Dispense
System (Model:PR-2D Type) |
 |
Non-pressure STAINLESS STEEL Material Tank
used
Tank Capacity :3L,10L,20L,30L
Easy to replenish a Non-pressure tank with
Liquid |
|
Economic Two Liquid
Meter/Mix/Dispense System(MODEL: PRL-2D
type) |
|
|
|
| |
| |
 |
Able to shot from an extremely
little to a large of quantity, to endure
abrasive with filler |
|
Prevent Mixer-head from hardening by
automatic anti-gel dispensation function
built-in
- Effective while a break time or working
stand by |
|
Perfect cleaning inside of Mixing part
by perfect 2 steps automatic cleaning function
with a clener and air pressure after work.
-Opreated on the Control Panel |
|
Keeping accurate mixing rate in measuring
system by one speed Controlled Geared Motor
and Two Gear Pumps. |
-Simple and easy to control shot speed
by regulating the speed of motor
-Able to change mixing rate later:it is
a fixed-mixing rate way by spur gear |
|
Stable shot regardless of viscosity changes
and resistance changes of pipes |
|
Easy to change the Mixer when hardened
by mistake |
|
Able to use long because of Static Mixer |
|
| |
| |
| Mixing
Rate |
Select
within 100:100-100:10(Fixed-mixing
rate type) |
| Shot
Amount |
1cc/sec-15cc/sec(Digital
Timer Type) |
| Mixing
Accuracy |
Within
 1% |
| Shot
Accuracy |
Within
3% |
| Viscosity |
1cps-PASTE |
| Auto
anti-gel shot |
Set-up
according to Pot-life of Reain
(PLC built-in Timer Type) |
| Resin
Tank |
STAINLESS
STEEL 304, 10L |
| Cleaner
Tank |
STAINLESS
STEEL 304, 8L |
| Mixer |
Static
Mixer Type(Power Mixer Type-Option) |
| Shot
Signal |
Foot
S/W Type (Hand S/W Type-Option) |
| Control
Type |
PLC
Type |
| Electricity/Air
ressure |
220V
/ Single Phase / 60Hz, Over 4kg |
|
|
| |
| |
| Tank/Line
Heater |
Able
to be stable accurate shot regardless
of a change of resin viscosity when
it used in winter with auto-temperature
control device from resin tank to
line hose |
| Tank
Agitator |
Prevent
liquid containing filler from setting
down is resin tank and remove an air
bubble smoothly |
| Tank
Vacuum Degassing |
Remove
an air bubble in a resin tank and
supply resins into the tank |
|
|
| |
 |
| System
Flow Cart |
| |
