The
same specification as PS-2000 SYRINGE SYSTEM,
but equipped a cartridge instead of
....syringe for
holding much more quantity.
For tube dispensing, put the tube material of
100/200 g into the inside of a container of
....cartridge. For
feeding, supply high viscous material into syring
from original tube.
Tube only dispensing-Add NEEDLE ADAPTER for
tube only
Feeding for syringe material-Add NEEDLE ADAPTER
& CLAMP+NIPPE&PIPE+SYRINGE only
....ADAPTER for
cartridge only
PS-2000
CARTRIDGE SYSTEM (SYRINGE FEEDING)
PS-2000S/M,310ml
CARTRIDGE SYSTEM
It has a 310ml cartridge of
Silicone/ Urethane /Kinds of bonds with havings
a controller without vacuum snuff-back function.
Select economically PS-2000M Controller(for
manual shot) when no need auto-shot depending
on applications, this is available with spring
balane in place of cartridge stand in consideration
of mobility.
Available to connect with auto gun valve not
to be sticky after high viscous material dispensing
and possible small shot control.
It is more simple to dispense
because of a modification to PS-2000M.
It can adjust dispensing speed as Air Pressure
FOOT S/W type built-in an air regulator.
Tank dispensing system
is applied for a great of materials, the
basic tank type is the pressurized tank
of STAINLESS STEEL.
In case of putting much more materials
than
....capacity
cartridge.( the basic tank capacity
....5L/10L/20L)
And putting One liquid epoxy, Grease or
Bond
....can directly
into to fthe tank(the basic capacity
....1L/5L/10L)
For feeding of syringe.
Dispensing for material can to be into
tank-Add
....a pressurized
plunger such as high viscous
....Epoxy/Grease
etc. during the dispensing.
Feeding for syringe material-Except
....CONTROLLER
AUTO GUN VALVE
TANK
FOR SYRINGE FEEDING
PS-2000
TANK & AUTO GUN VALVE SYSTEM
PS-2000 CONTROLLER
1EA
PRESSURIZED TANK
(material for SUS 304)
(1L/5L/10L/20L-option)
1EA
AUTO GUN VALVE
1EA
VALVE STAND(option)
1EA
VALVE NEEDLE ADAPTER
(PT1/4"-option)
1EA
PLASTIC NEEDLE(15G~27G-option)
10EA
FOOT S/W
1EA
POWER CORD
1EA
OPERATION MANUAL
1EA
TURN
TABLE & UP/DOWN SYSTEM
Ideal for rotation-application products
....such
as speaker / buzzer etc.
Dispensing the minimum in the moment
....jig rotated
of Turn-Table with
....Syringe/cartidge/Tank
owing to material under
....production.
There is no material leaking from a joint
....connecting
valve under silicone cartridge.
Improve efficiency of work due to special
....designed
cartridge adapter changed easily.
PS-2000&PH-1000
HEATER SYSTEM
When dispensing highly viscous material,
equipping with Heater for easily dispense
volume control or improving ability of
dispensation on a syringe or
a cartridge.
Control temperature separately through
PH-1000 controller.
Rm612, Daerung Techno Tower8th,
481-11 Gasan-dong Geumcheon-Gu, Seoul Korea
TEL: +82-2-2163-8646 / FAX: +82-2-2163-8684
/ E-mail:dispenserkim@yahoo.co.kr
PS-2000
CARTRIDGE SYSTEM 
The
same specification as PS-2000 SYRINGE SYSTEM,
but equipped a cartridge instead of
PS-2000
CARTRIDGE SYSTEM (TUBE ONLY DISPENSING)
